GATES GT2 Belt LL-2GT-10 RF Power Grip GT - 10mm Per Metre Genuine AU

Gates Unitta

  • $26.65
    Unit price per 
Tax included. Shipping calculated at checkout.

Only 0 left!
Will be in stock after

Compatible with;

CNC/3D Printers etc that use 10mm belts / pulleys


  • 10mm Width with 2mm pitch
  • Glass-Fibre reinforced rubber belt
  • Part# LL-2GT-10 RF 

Ideal replacement for old or cheap belts on machines. The LL-2GT-10 RF belt is stiffer, withstands higher stretching loads and has a greater tensile strength than the cheaper alternatives due to the inclusion of glass-fibre reinforcement.

RF Variation

We currently sell Both RF and Non-RF types of 2GT belts. The RF variant can be identified by the red/orange look to the teeth of the belt. This coating is designed by GATES to help prevent belt dust on initial drive along with promoting vibration reduction and smoother running. 

Belt quantities are always supplied over purchase amount. If you require slightly more than a metre you should be OK to order just 1x unit, though it is always encouraged to contact us if you have any specific requirements, and we can see what we can do for you.  

Our GATES products are genuine, and it is advised to double check when purchasing similar products elsewhere. The defining characteristics on genuine GATES 2GT belts are the string of part numbers and branding approx. every few feet along the belts outer face. If the belt is Fibre reinforced, you will notice reddish fibres along the edge and if it is a "RF" variant (E.g LL-2GT-9 RF), the teeth of the belt will have a red fibre look also. While the teeth a typically black rubber on non-genuine products, there are some in the market that have a much flatter and orange look to the teeth. 

PLEASE NOTE: Product is sold by the metre and will arrive in one continuous length based on the requested amount. 

We Also Recommend