Creality's answer to a high end nozzle solution for the K1, K1 MAX and CR-M4 3D Printers. With a selection of hardened steel nozzles and plated copper nozzles in various sizes, you will have a nozzle for every application.
Volcano Style Nozzle: K1 specific nozzles will work in volcano heater blocks as the thread is the same, but please note that the nozzle head is approx. 3mm longer, increasing the entire nozzle length by this amount.
Kit includes:
- 2x 0.4mm Hardened Steel High Flow Nozzle
- 2x 0.4mm Plated Copper High Flow Nozzle
- 1x 0.6mm Hardened Steel High Flow Nozzle
- 1x 0.6mm Plated Copper High Flow Nozzle
- 1x 0.8mm Hardened Steel High Flow Nozzle
- 1x 0.8mm Plated Copper High Flow Nozzle
Specifications:
Plated Copper Nozzle
Temperature Resistance: 500°c
Sizes: 0.4mm, 0.6mm & 0.8mm in above selection
Hardness (mohs): 6
Thermal Conductivity: 330W/m·k
Inner wall: Ra 0.4
Compatible Filaments:
PLA, ABS, PETG, TPE, TPU, PC, Composite Filaments such as Carbon Fibre, Glass Fibre, Steel, Wood, Tungsten and Glow in the Dark. (always check with filament manufacturer if unsure)
Hardened Steel
Temperature Resistance: 450°c
Sizes: 0.4mm, 0.6mm & 0.8mm in above selection
Hardness (mohs): 7.8
Thermal Conductivity: 22W/m·k
Inner wall: Ra 0.4
Compatible Filaments:
PLA, ABS, PETG, TPE, TPU, PC, PEEK, PEKK PEI, PSU, PPSU and most other FDM/High Temp Filaments (always check with filament manufacturer if unsure)
PLEASE NOTE: Creality 3D recommends hot tightening nozzles to prevent any installation or operational issues. (See video for more information)
